My Ironhead Adventure

Next Post> In the process of looking at the wiring and kinging over and over I found i needed to go back in and hook the bike back up...

Next Post> I decided to dig in and see what was happening. I removed the starter and solenoid. The starter has no forseable gasket. Only...

Next Post> In the process of working on the bike I started to create the different pieces of the bike in 3d and happened to create this...

Next Post> A little farther and found some wings. This bike was loved at one point. The paint job was layed with paint, a leveler, then...

Next Post> Got a couple of Harley lights. This old iron is dark at night. I wated to help be more visable. I had already wired the radio...

Next Post> Normal have the closed, open, or warm up positions. This was more to the old ideas or stories. Where the choke plate should...

Next Post> New pistons, rings, springs, collars, valves lapped, jugs honed, heads polished up front and back. Love the positive/ negative...

Next Post> Round 2 Ding! Ding! Ding! Back into the engine, taking the back head apart I found the same damage as the front had to the...

Next Post> Ride when you can. Had gotten the front head back together and gave her a nice rattle can once over. She looked so beautiful....

Next Post> I got the front head back on new piston, rings, springs, collars, valves (lapped). The guides were good no leaks. I loved the...