Smack! Spring to the face
Next Post> So time to pull the primary. I took some threaded rod and some board. Drilled some holes in the board even with the case bolt...
Getty up
Next Post> New pistons, rings, springs, collars, valves lapped, jugs honed, heads polished up front and back. Love the positive/ negative...
Lets get ready to rumble Boom!
Next Post> Round 2 Ding! Ding! Ding! Back into the engine, taking the back head apart I found the same damage as the front had to the...
Shining like a rocker box star
Next Post> Since had the bike apart I started to shine up the rocker box. Took me a good couple of days using tiny pieces of sand paper...
Boom!
Next Post> When pulled the jug found the problem! Found that bent tip screw driver and a punch work well to get the flat springs out.....
Valve Spring collar
Next Post> Set up how valve spring collar works Next Post> #ironhead #xlch #1977 #harley #xlh #3d #valve #spring #collar
Setting up to lap the valves.
Next Post> Ordered new springs / collars Rocker springs were still good, minimal wear on the armatures. Still using same old cork for the...